This is a SHALL in RFC 7301, Section 3.2.
Also some more cleanup after NPN, which worked the other way around
(with the possibility that the client could pick a protocol the server
did not suggest).
Change-Id: I83cc43ca1b3c686dfece8315436441c077065d82
Reviewed-on: https://go-review.googlesource.com/c/go/+/239748
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I33c228904fe82dcf57683b63627497d3eb841ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246338
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Restore previously sent SCTs and stapled OCSP response during session
resumption for both TLS 1.2 and 1.3. This behavior is somewhat
complicated for TLS 1.2 as SCTs are sent during the server hello,
so they override what is saved in ClientSessionState. It is likely
that if the server is sending a different set of SCTs there is probably
a reason for doing so, such as a log being retired, or SCT validation
requirements changing, so it makes sense to defer to the server in
that case.
Fixes#39075
Change-Id: I3c0fa2f69c6bf0247a447c48a1b4c733a882a233
Reviewed-on: https://go-review.googlesource.com/c/go/+/234237
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Since the ConnectionState will now be available during
verification, some code was moved around in order to
initialize and make available as much of the fields on
Conn as possible before the ConnectionState is verified.
Fixes#36736
Change-Id: I0e3efa97565ead7de5c48bb8a87e3ea54fbde140
Reviewed-on: https://go-review.googlesource.com/c/go/+/229122
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Clients have to reject any HelloRetryRequest message that doesn't lead
to a change in the ClientHello. Instead, we were rejecting any HRR that
didn't select an alternative group, even if it sent a cookie, which
would change the CH.
The good news is that I know of no TLS servers that use or need HRRs
exclusively for cookies (which are mostly useful in DTLS as a way to
verify the source address). The bad news is that we poisoned the
ecosystem as Go 1.12 to 1.14 will reject such HRRs. Oops, hopefully no
one needed this.
No tests because neither Go nor s_server support cookies. This would
presumably get covered once we integrate BoGo.
Fixes#30149
Change-Id: I760fb1ded81148ac3096cf201cbc1e941374b83d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231039
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Updated TestBoringServerSignatureAndHash to expect RSA-PSS to work with
TLS 1.2, and hence with FIPS mode.
Change-Id: I358271b2e4804733cf61dc132fa0c5f39c2bff19
Signing-side signature algorithm selection moved to
selectSignatureScheme, so add FIPS logic there.
Change-Id: I827e7296d01ecfd36072e2139e74603ef42c6b24
Also, add Version to CertificateRequestInfo, as the semantics of
SignatureSchemes change based on version: the ECDSA SignatureSchemes are
only constrained to a specific curve in TLS 1.3.
Fixes#32426
Change-Id: I7a551bea864799e98118349ac2476162893d1ffd
Reviewed-on: https://go-review.googlesource.com/c/go/+/205058
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This refactors a lot of the certificate support logic to make it cleaner
and reusable where possible. These changes will make the following CLs
much simpler.
In particular, the heavily overloaded pickSignatureAlgorithm is gone.
That function used to cover both signing and verifying side, would work
both for pre-signature_algorithms TLS 1.0/1.1 and TLS 1.2, and returned
sigalg, type and hash.
Now, TLS 1.0/1.1 and 1.2 are differentiated at the caller, as they have
effectively completely different logic. TLS 1.0/1.1 simply use
legacyTypeAndHashFromPublicKey as they employ a fixed hash function and
signature algorithm for each public key type. TLS 1.2 is instead routed
through selectSignatureScheme (on the signing side) or
isSupportedSignatureAlgorithm (on the verifying side) and
typeAndHashFromSignatureScheme, like TLS 1.3.
On the signing side, signatureSchemesForCertificate was already version
aware (for PKCS#1 v1.5 vs PSS support), so selectSignatureScheme just
had to learn the Section 7.4.1.4.1 defaults for a missing
signature_algorithms to replace pickSignatureAlgorithm.
On the verifying side, pickSignatureAlgorithm was also checking the
public key type, while isSupportedSignatureAlgorithm +
typeAndHashFromSignatureScheme are not, but that check was redundant
with the one in verifyHandshakeSignature.
There should be no major change in behavior so far. A few minor changes
came from the refactor: we now correctly require signature_algorithms in
TLS 1.3 when using a certificate; we won't use Ed25519 in TLS 1.2 if the
client didn't send signature_algorithms; and we don't send
ec_points_format in the ServerHello (a compatibility measure) if we are
not doing ECDHE anyway because there are no mutually supported curves.
The tests also got simpler because they test simpler functions. The
caller logic switching between TLS 1.0/1.1 and 1.2 is tested by the
transcript tests.
Updates #32426
Change-Id: Ice9dcaea78d204718f661f8d60efdb408ba41577
Reviewed-on: https://go-review.googlesource.com/c/go/+/205061
Reviewed-by: Katie Hockman <katie@golang.org>
Also, fix the alert value sent when a signature by a client certificate
is invalid in TLS 1.0-1.2.
Fixes#35190
Change-Id: I2ae1d5593dfd5ee2b4d979664aec74aab4a8a704
Reviewed-on: https://go-review.googlesource.com/c/go/+/204157
Reviewed-by: Katie Hockman <katie@golang.org>
Support for Ed25519 certificates was added in CL 175478, this wires them
up into the TLS stack according to RFC 8422 (TLS 1.2) and RFC 8446 (TLS 1.3).
RFC 8422 also specifies support for TLS 1.0 and 1.1, and I initially
implemented that, but even OpenSSL doesn't take the complexity, so I
just dropped it. It would have required keeping a buffer of the
handshake transcript in order to do the direct Ed25519 signatures. We
effectively need to support TLS 1.2 because it shares ClientHello
signature algorithms with TLS 1.3.
While at it, reordered the advertised signature algorithms in the rough
order we would want to use them, also based on what curves have fast
constant-time implementations.
Client and client auth tests changed because of the change in advertised
signature algorithms in ClientHello and CertificateRequest.
Fixes#25355
Change-Id: I9fdd839afde4fd6b13fcbc5cc7017fd8c35085ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/177698
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
- Uses a chacha20-based CSPRNG to generate randomized fingeprints
- Refactors generation of randomized fingerprints, removing many redundant shuffle functions.
- Adds Seed field to ClientHelloID
- ClientHelloID.Version is now a string (was uint16)
Adds support for following TLS 1.3 extensions:
- PSKKeyExchangeModes
- SupportedVersions
- KeyShare
and uses them to implement newest Chrome and Firefox parrots.
Tests for default Golang uTLS were regenerated because
they previously used TLS-1.2 as max version.
signatureSchemesForCertificate was written to be used with TLS 1.3, but
ended up used for TLS 1.2 client certificates in a refactor. Since it
only supported TLS 1.3 signature algorithms, it would lead to no RSA
client certificates being sent to servers that didn't support RSA-PSS.
TestHandshakeClientCertRSAPKCS1v15 was testing *specifically* for this,
but alas the OpenSSL flag -verify accepts an empty certificates list as
valid, as opposed to -Verify...
Fixes#28925
Change-Id: I61afc02ca501d3d64ab4ad77bbb4cf10931e6f93
Reviewed-on: https://go-review.googlesource.com/c/151660
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Note that the SignatureSchemes passed to GetClientCertificate in TLS 1.2
are now filtered by the requested certificate type. This feels like an
improvement anyway, and the full list can be surfaced as well when
support for signature_algorithms_cert is added, which actually matches
the semantics of the CertificateRequest signature_algorithms in TLS 1.2.
Also, note a subtle behavior change in server side resumption: if a
certificate is requested but not required, and the resumed session did
not include one, it used not to invoke VerifyPeerCertificate. However,
if the resumed session did include a certificate, it would. (If a
certificate was required but not in the session, the session is rejected
in checkForResumption.) This inconsistency could be unexpected, even
dangerous, so now VerifyPeerCertificate is always invoked. Still not
consistent with the client behavior, which does not ever invoke
VerifyPeerCertificate on resumption, but it felt too surprising to
entirely change either.
Updates #9671
Change-Id: Ib2b0dbc30e659208dca3ac07d6c687a407d7aaaf
Reviewed-on: https://go-review.googlesource.com/c/147599
Reviewed-by: Adam Langley <agl@golang.org>
Added some assertions to testHandshake, but avoided checking the error
of one of the Close() because the one that would lose the race would
write the closeNotify to a connection closed on the other side which is
broken on js/wasm (#28650). Moved that Close() after the chan sync to
ensure it happens second.
Accepting a ticket with client certificates when NoClientCert is
configured is probably not a problem, and we could hide them to avoid
confusing the application, but the current behavior is to skip the
ticket, and I'd rather keep behavior changes to a minimum.
Updates #9671
Change-Id: I93b56e44ddfe3d48c2bef52c83285ba2f46f297a
Reviewed-on: https://go-review.googlesource.com/c/147445
Reviewed-by: Adam Langley <agl@golang.org>
Also check original certificate validity when resuming TLS 1.0–1.2. Will
refuse to resume a session if the certificate is expired or if the
original connection had InsecureSkipVerify and the resumed one doesn't.
Support only PSK+DHE to protect forward secrecy even with lack of a
strong session ticket rotation story.
Tested with NSS because s_server does not provide any way of getting the
same session ticket key across invocations. Will self-test like TLS
1.0–1.2 once server side is implemented.
Incorporates CL 128477 by @santoshankr.
Fixes#24919
Updates #9671
Change-Id: Id3eaa5b6c77544a1357668bf9ff255f3420ecc34
Reviewed-on: https://go-review.googlesource.com/c/147420
Reviewed-by: Adam Langley <agl@golang.org>
Looks like the introduction of CCS records in the client second flight
gave time to s_server to send NewSessionTicket messages in between the
client application data and close_notify. There seems to be no way of
turning NewSessionTicket messages off, neither by not sending a
psk_key_exchange_modes extension, nor by command line flag.
Interleaving the client write like that tickled an issue akin to #18701:
on Windows, the client reaches Close() before the last record is drained
from the send buffer, the kernel notices and resets the connection,
cutting short the last flow. There is no good way of synchronizing this,
so we sleep for a RTT before calling close, like in CL 75210. Sigh.
Updates #9671
Change-Id: I44dc1cca17b373695b5a18c2741f218af2990bd1
Reviewed-on: https://go-review.googlesource.com/c/147419
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Also, add support for the SSLKEYLOGFILE environment variable to the
tests, to simplify debugging of unexpected failures.
Updates #9671
Change-Id: I20a34a5824f083da93097b793d51e796d6eb302b
Reviewed-on: https://go-review.googlesource.com/c/147417
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
