When either the server or client are lacking hardware support for
AES-GCM ciphers, indicated by the server lacking the relevant
instructions and by the client not putting AES-GCM ciphers at the top
of its preference list, reorder the preference list to de-prioritize
AES-GCM based ciphers when they are adjacent to other AEAD ciphers.
Also updates a number of recorded openssl TLS tests which previously
only specified TLS 1.2 cipher preferences (using -cipher), but not
TLS 1.3 cipher preferences (using -ciphersuites), to specify both
preferences, making these tests more predictable.
Fixes#41181.
Change-Id: Ied896c96c095481e755aaff9ff0746fb4cb9568e
Reviewed-on: https://go-review.googlesource.com/c/go/+/262857
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
This is a SHALL in RFC 7301, Section 3.2.
Also some more cleanup after NPN, which worked the other way around
(with the possibility that the client could pick a protocol the server
did not suggest).
Change-Id: I83cc43ca1b3c686dfece8315436441c077065d82
Reviewed-on: https://go-review.googlesource.com/c/go/+/239748
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I33c228904fe82dcf57683b63627497d3eb841ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246338
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Also add a test that could reproduce this error and
ensure it doesn't occur in other configurations.
Fixes#39012
Change-Id: If792b5131f312c269fd2c5f08c9ed5c00188d1af
Reviewed-on: https://go-review.googlesource.com/c/go/+/233957
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Since the ConnectionState will now be available during
verification, some code was moved around in order to
initialize and make available as much of the fields on
Conn as possible before the ConnectionState is verified.
Fixes#36736
Change-Id: I0e3efa97565ead7de5c48bb8a87e3ea54fbde140
Reviewed-on: https://go-review.googlesource.com/c/go/+/229122
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updated TestBoringServerSignatureAndHash to expect RSA-PSS to work with
TLS 1.2, and hence with FIPS mode.
Change-Id: I358271b2e4804733cf61dc132fa0c5f39c2bff19
Signing-side signature algorithm selection moved to
selectSignatureScheme, so add FIPS logic there.
Change-Id: I827e7296d01ecfd36072e2139e74603ef42c6b24
Now that we have a full implementation of the logic to check certificate
compatibility, we can let applications just list multiple chains in
Certificates (for example, an RSA and an ECDSA one) and choose the most
appropriate automatically.
NameToCertificate only maps each name to one chain, so simply deprecate
it, and while at it simplify its implementation by not stripping
trailing dots from the SNI (which is specified not to have any, see RFC
6066, Section 3) and by not supporting multi-level wildcards, which are
not a thing in the WebPKI (and in crypto/x509).
The performance of SupportsCertificate without Leaf is poor, but doesn't
affect current users. For now document that, and address it properly in
the next cycle. See #35504.
While cleaning up the Certificates/GetCertificate/GetConfigForClient
behavior, also support leaving Certificates/GetCertificate nil if
GetConfigForClient is set, and send unrecognized_name when there are no
available certificates.
Fixes#29139Fixes#18377
Change-Id: I26604db48806fe4d608388e55da52f34b7ca4566
Reviewed-on: https://go-review.googlesource.com/c/go/+/205059
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
This refactors a lot of the certificate support logic to make it cleaner
and reusable where possible. These changes will make the following CLs
much simpler.
In particular, the heavily overloaded pickSignatureAlgorithm is gone.
That function used to cover both signing and verifying side, would work
both for pre-signature_algorithms TLS 1.0/1.1 and TLS 1.2, and returned
sigalg, type and hash.
Now, TLS 1.0/1.1 and 1.2 are differentiated at the caller, as they have
effectively completely different logic. TLS 1.0/1.1 simply use
legacyTypeAndHashFromPublicKey as they employ a fixed hash function and
signature algorithm for each public key type. TLS 1.2 is instead routed
through selectSignatureScheme (on the signing side) or
isSupportedSignatureAlgorithm (on the verifying side) and
typeAndHashFromSignatureScheme, like TLS 1.3.
On the signing side, signatureSchemesForCertificate was already version
aware (for PKCS#1 v1.5 vs PSS support), so selectSignatureScheme just
had to learn the Section 7.4.1.4.1 defaults for a missing
signature_algorithms to replace pickSignatureAlgorithm.
On the verifying side, pickSignatureAlgorithm was also checking the
public key type, while isSupportedSignatureAlgorithm +
typeAndHashFromSignatureScheme are not, but that check was redundant
with the one in verifyHandshakeSignature.
There should be no major change in behavior so far. A few minor changes
came from the refactor: we now correctly require signature_algorithms in
TLS 1.3 when using a certificate; we won't use Ed25519 in TLS 1.2 if the
client didn't send signature_algorithms; and we don't send
ec_points_format in the ServerHello (a compatibility measure) if we are
not doing ECDHE anyway because there are no mutually supported curves.
The tests also got simpler because they test simpler functions. The
caller logic switching between TLS 1.0/1.1 and 1.2 is tested by the
transcript tests.
Updates #32426
Change-Id: Ice9dcaea78d204718f661f8d60efdb408ba41577
Reviewed-on: https://go-review.googlesource.com/c/go/+/205061
Reviewed-by: Katie Hockman <katie@golang.org>
Also, fix the alert value sent when a signature by a client certificate
is invalid in TLS 1.0-1.2.
Fixes#35190
Change-Id: I2ae1d5593dfd5ee2b4d979664aec74aab4a8a704
Reviewed-on: https://go-review.googlesource.com/c/go/+/204157
Reviewed-by: Katie Hockman <katie@golang.org>
SSLv3 has been irreparably broken since the POODLE attack 5 years ago
and RFC 7568 (f.k.a. draft-ietf-tls-sslv3-diediedie) prohibits its use
in no uncertain terms.
As announced in the Go 1.13 release notes, remove support for it
entirely in Go 1.14.
Updates #32716
Change-Id: Id653557961d8f75f484a01e6afd2e104a4ccceaf
Reviewed-on: https://go-review.googlesource.com/c/go/+/191976
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Support for Ed25519 certificates was added in CL 175478, this wires them
up into the TLS stack according to RFC 8422 (TLS 1.2) and RFC 8446 (TLS 1.3).
RFC 8422 also specifies support for TLS 1.0 and 1.1, and I initially
implemented that, but even OpenSSL doesn't take the complexity, so I
just dropped it. It would have required keeping a buffer of the
handshake transcript in order to do the direct Ed25519 signatures. We
effectively need to support TLS 1.2 because it shares ClientHello
signature algorithms with TLS 1.3.
While at it, reordered the advertised signature algorithms in the rough
order we would want to use them, also based on what curves have fast
constant-time implementations.
Client and client auth tests changed because of the change in advertised
signature algorithms in ClientHello and CertificateRequest.
Fixes#25355
Change-Id: I9fdd839afde4fd6b13fcbc5cc7017fd8c35085ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/177698
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
signatureSchemesForCertificate was written to be used with TLS 1.3, but
ended up used for TLS 1.2 client certificates in a refactor. Since it
only supported TLS 1.3 signature algorithms, it would lead to no RSA
client certificates being sent to servers that didn't support RSA-PSS.
TestHandshakeClientCertRSAPKCS1v15 was testing *specifically* for this,
but alas the OpenSSL flag -verify accepts an empty certificates list as
valid, as opposed to -Verify...
Fixes#28925
Change-Id: I61afc02ca501d3d64ab4ad77bbb4cf10931e6f93
Reviewed-on: https://go-review.googlesource.com/c/151660
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Fix a couple overlooked ConnectionState fields noticed by net/http
tests, and add a test in crypto/tls. Spun off CL 147638 to keep that one
cleanly about enabling TLS 1.3.
Change-Id: I9a6c2e68d64518a44be2a5d7b0b7b8d78c98c95d
Reviewed-on: https://go-review.googlesource.com/c/148900
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TLS_FALLBACK_SCSV is extremely fragile in the presence of sparse
supported_version, but gave it the best try I could.
Set the server random canaries but don't check them yet, waiting for the
browsers to clear the way of misbehaving middleboxes.
Updates #9671
Change-Id: Ie55efdec671d639cf1e716acef0c5f103e91a7ce
Reviewed-on: https://go-review.googlesource.com/c/147617
Reviewed-by: Adam Langley <agl@golang.org>
Note that the SignatureSchemes passed to GetClientCertificate in TLS 1.2
are now filtered by the requested certificate type. This feels like an
improvement anyway, and the full list can be surfaced as well when
support for signature_algorithms_cert is added, which actually matches
the semantics of the CertificateRequest signature_algorithms in TLS 1.2.
Also, note a subtle behavior change in server side resumption: if a
certificate is requested but not required, and the resumed session did
not include one, it used not to invoke VerifyPeerCertificate. However,
if the resumed session did include a certificate, it would. (If a
certificate was required but not in the session, the session is rejected
in checkForResumption.) This inconsistency could be unexpected, even
dangerous, so now VerifyPeerCertificate is always invoked. Still not
consistent with the client behavior, which does not ever invoke
VerifyPeerCertificate on resumption, but it felt too surprising to
entirely change either.
Updates #9671
Change-Id: Ib2b0dbc30e659208dca3ac07d6c687a407d7aaaf
Reviewed-on: https://go-review.googlesource.com/c/147599
Reviewed-by: Adam Langley <agl@golang.org>
Added some assertions to testHandshake, but avoided checking the error
of one of the Close() because the one that would lose the race would
write the closeNotify to a connection closed on the other side which is
broken on js/wasm (#28650). Moved that Close() after the chan sync to
ensure it happens second.
Accepting a ticket with client certificates when NoClientCert is
configured is probably not a problem, and we could hide them to avoid
confusing the application, but the current behavior is to skip the
ticket, and I'd rather keep behavior changes to a minimum.
Updates #9671
Change-Id: I93b56e44ddfe3d48c2bef52c83285ba2f46f297a
Reviewed-on: https://go-review.googlesource.com/c/147445
Reviewed-by: Adam Langley <agl@golang.org>
Also check original certificate validity when resuming TLS 1.0–1.2. Will
refuse to resume a session if the certificate is expired or if the
original connection had InsecureSkipVerify and the resumed one doesn't.
Support only PSK+DHE to protect forward secrecy even with lack of a
strong session ticket rotation story.
Tested with NSS because s_server does not provide any way of getting the
same session ticket key across invocations. Will self-test like TLS
1.0–1.2 once server side is implemented.
Incorporates CL 128477 by @santoshankr.
Fixes#24919
Updates #9671
Change-Id: Id3eaa5b6c77544a1357668bf9ff255f3420ecc34
Reviewed-on: https://go-review.googlesource.com/c/147420
Reviewed-by: Adam Langley <agl@golang.org>
Looks like the introduction of CCS records in the client second flight
gave time to s_server to send NewSessionTicket messages in between the
client application data and close_notify. There seems to be no way of
turning NewSessionTicket messages off, neither by not sending a
psk_key_exchange_modes extension, nor by command line flag.
Interleaving the client write like that tickled an issue akin to #18701:
on Windows, the client reaches Close() before the last record is drained
from the send buffer, the kernel notices and resets the connection,
cutting short the last flow. There is no good way of synchronizing this,
so we sleep for a RTT before calling close, like in CL 75210. Sigh.
Updates #9671
Change-Id: I44dc1cca17b373695b5a18c2741f218af2990bd1
Reviewed-on: https://go-review.googlesource.com/c/147419
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Also, add support for the SSLKEYLOGFILE environment variable to the
tests, to simplify debugging of unexpected failures.
Updates #9671
Change-Id: I20a34a5824f083da93097b793d51e796d6eb302b
Reviewed-on: https://go-review.googlesource.com/c/147417
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Implement a basic TLS 1.3 server handshake, only enabled if explicitly
requested with MaxVersion.
This CL intentionally leaves for future CLs:
- PSK modes and resumption
- client authentication
- compatibility mode ChangeCipherSpecs
- early data skipping
- post-handshake messages
- downgrade protection
- KeyLogWriter support
- TLS_FALLBACK_SCSV processing
It also leaves a few areas up for a wider refactor (maybe in Go 1.13):
- the certificate selection logic can be significantly improved,
including supporting and surfacing signature_algorithms_cert, but
this isn't new in TLS 1.3 (see comment in processClientHello)
- handshake_server_tls13.go can be dried up and broken into more
meaningful, smaller functions, but it felt premature to do before
PSK and client auth support
- the monstrous ClientHello equality check in doHelloRetryRequest can
get both cleaner and more complete with collaboration from the
parsing layer, which can come at the same time as extension
duplicates detection
Updates #9671
Change-Id: Id9db2b6ecc2eea21bf9b59b6d1d9c84a7435151c
Reviewed-on: https://go-review.googlesource.com/c/147017
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
