This sets us up for ECH, which need compressible extensions to be
contiguous. Put them at the end to make things easier for everyone.
Change-Id: I2a51f76d5fcd1b6d82325f5a4a8cde6d75f1be0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/585437
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Auto-Submit: Roland Shoemaker <roland@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
All OpenSSL tests now test operation with EMS. To test a handshake
*without* EMS we need to pass -Options=-ExtendedMasterSecret which is
only available in OpenSSL 3.1, which breaks a number of other tests.
Updates #43922
Change-Id: Ib9ac79a1d03fab6bfba5fe9cd66689cff661cda7
Reviewed-on: https://go-review.googlesource.com/c/go/+/497376
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Auto-Submit: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
We now have a (well, two, depending on AES hardware support) universal
cipher suite preference order, based on their security and performance.
Peer and application lists are now treated as filters (and AES hardware
support hints) that are applied to this universal order.
This removes a complex and nuanced decision from the application's
responsibilities, one which we are better equipped to make and which
applications usually don't need to have an opinion about. It also lets
us worry less about what suites we support or enable, because we can be
confident that bad ones won't be selected over good ones.
This also moves 3DES suites to InsecureCipherSuites(), even if they are
not disabled by default. Just because we can keep them as a last resort
it doesn't mean they are secure. Thankfully we had not promised that
Insecure means disabled by default.
Notable test changes:
- TestCipherSuiteCertPreferenceECDSA was testing that we'd pick the
right certificate regardless of CipherSuite ordering, which is now
completely ignored, as tested by TestCipherSuitePreference. Removed.
- The openssl command of TestHandshakeServerExportKeyingMaterial was
broken for TLS 1.0 in CL 262857, but its golden file was not
regenerated, so the test kept passing. It now broke because the
selected suite from the ones in the golden file changed.
- In TestAESCipherReordering, "server strongly prefers AES-GCM" is
removed because there is no way for a server to express a strong
preference anymore; "client prefers AES-GCM and AES-CBC over ChaCha"
switched to ChaCha20 when the server lacks AES hardware; and finally
"client supports multiple AES-GCM" changed to always prefer AES-128
per the universal preference list.
* this is going back on an explicit decision from CL 262857, and
while that client order is weird and does suggest a strong dislike
for ChaCha20, we have a strong dislike for software AES, so it
didn't feel worth making the logic more complex
- All Client-* golden files had to be regenerated because the
ClientHello cipher suites have changed.
(Even when Config.CipherSuites was limited to one suite, the TLS 1.3
default order changed.)
Fixes#45430Fixes#41476 (as 3DES is now always the last resort)
Change-Id: If5f5d356c0f8d1f1c7542fb06644a478d6bad1e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/314609
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
TLS 1.3, which requires RSA-PSS, is now enabled without a GODEBUG
opt-out, and with the introduction of
Certificate.SupportedSignatureAlgorithms (#28660) there is a
programmatic way to avoid RSA-PSS (disable TLS 1.3 with MaxVersion and
use that field to specify only PKCS#1 v1.5 SignatureSchemes).
This effectively reverts 0b3a57b5374bba3fdf88258e2be4c8be65e6a5de,
although following CL 205061 all of the signing-side logic is
conveniently centralized in signatureSchemesForCertificate.
Fixes#32425
Change-Id: I7c9a8893bb5d518d86eae7db82612b9b2cd257d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/205063
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Signing with RSA-PSS can uncover faulty crypto.Signer implementations,
and it can fail for (broken) small keys. We'll have to take that
breakage eventually, but it would be nice for it to be opt-out at first.
TLS 1.3 requires RSA-PSS and is opt-out in Go 1.13. Instead of making a
TLS 1.3 opt-out influence a TLS 1.2 behavior, let's wait to add RSA-PSS
to TLS 1.2 until TLS 1.3 is on without opt-out.
Note that since the Client Hello is sent before a protocol version is
selected, we have to advertise RSA-PSS there to support TLS 1.3.
That means that we still support RSA-PSS on the client in TLS 1.2 for
verifying server certificates, which is fine, as all issues arise on the
signing side. We have to be careful not to pick (or consider available)
RSA-PSS on the client for client certificates, though.
We'd expect tests to change only in TLS 1.2:
* the server won't pick PSS to sign the key exchange
(Server-TLSv12-* w/ RSA, TestHandshakeServerRSAPSS);
* the server won't advertise PSS in CertificateRequest
(Server-TLSv12-ClientAuthRequested*, TestClientAuth);
* and the client won't pick PSS for its CertificateVerify
(Client-TLSv12-ClientCert-RSA-*, TestHandshakeClientCertRSAPSS,
Client-TLSv12-Renegotiate* because "R" requests a client cert).
Client-TLSv13-ClientCert-RSA-RSAPSS was updated because of a fix in the test.
This effectively reverts 88343530720a52c96b21f2bd5488c8fb607605d7.
Testing was made more complex by the undocumented semantics of OpenSSL's
-[client_]sigalgs (see openssl/openssl#9172).
Updates #32425
Change-Id: Iaddeb2df1f5c75cd090cc8321df2ac8e8e7db349
Reviewed-on: https://go-review.googlesource.com/c/go/+/182339
Reviewed-by: Adam Langley <agl@golang.org>
Support for Ed25519 certificates was added in CL 175478, this wires them
up into the TLS stack according to RFC 8422 (TLS 1.2) and RFC 8446 (TLS 1.3).
RFC 8422 also specifies support for TLS 1.0 and 1.1, and I initially
implemented that, but even OpenSSL doesn't take the complexity, so I
just dropped it. It would have required keeping a buffer of the
handshake transcript in order to do the direct Ed25519 signatures. We
effectively need to support TLS 1.2 because it shares ClientHello
signature algorithms with TLS 1.3.
While at it, reordered the advertised signature algorithms in the rough
order we would want to use them, also based on what curves have fast
constant-time implementations.
Client and client auth tests changed because of the change in advertised
signature algorithms in ClientHello and CertificateRequest.
Fixes#25355
Change-Id: I9fdd839afde4fd6b13fcbc5cc7017fd8c35085ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/177698
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This is the equivalent change to 1c105980 but for SHA-512.
SHA-512 certificates are already supported by default since b53bb2ca,
but some servers will refuse connections if the algorithm is not
advertised in the overloaded signatureAndHash extension (see 09b238f1).
This required adding support for SHA-512 signatures on CertificateVerify
and ServerKeyExchange messages, because of said overloading.
Some testdata/Client-TLSv1{0,1} files changed because they send a 1.2
ClientHello even if the server picks a lower version.
Closes#22422
Change-Id: I16282d03a3040260d203711ec21e6b20a0e1e105
Reviewed-on: https://go-review.googlesource.com/74950
Run-TryBot: Filippo Valsorda <hi@filippo.io>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This change enables the ChaCha20-Poly1305 cipher suites by default. This
changes the default ClientHello and thus requires updating all the
tests.
Change-Id: I6683a2647caaff4a11f9e932babb6f07912cad94
Reviewed-on: https://go-review.googlesource.com/30958
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since this changes the offered curves in the ClientHello, all the test
data needs to be updated too.
Change-Id: I227934711104349c0f0eab11d854e5a2adcbc363
Reviewed-on: https://go-review.googlesource.com/30825
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We will need OpenSSL 1.1.0 in order to test some of the features
expected for Go 1.8. However, 1.1.0 also disables (by default) some
things that we still want to test, such as RC4, 3DES and SSLv3. Thus
developers wanting to update the crypto/tls test data will need to build
OpenSSL from source.
This change updates the test data with transcripts generated by 1.1.0
(in order to reduce future diffs) and also causes a banner to be printed
if 1.1.0 is not used when updating.
(The test for an ALPN mismatch is removed because OpenSSL now terminates
the connection with a fatal alert if no known ALPN protocols are
offered. There's no point testing against this because it's an OpenSSL
behaviour.)
Change-Id: I957516975e0b8c7def84184f65c81d0b68f1c551
Reviewed-on: https://go-review.googlesource.com/30821
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These were new with TLS 1.2 and, reportedly, some servers require it.
Since it's easy, this change adds suport for three flavours of
AES-128-CBC with SHA-256 MACs.
Other testdata/ files have to be updated because this changes the list
of cipher suites offered by default by the client.
Fixes#15487.
Change-Id: I1b14330c31eeda20185409a37072343552c3464f
Reviewed-on: https://go-review.googlesource.com/27315
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The RFC is clear that the Parameters in an AlgorithmIdentifer for an RSA
public key must be NULL. BoringSSL enforces this so we have strong
evidence that this is a widely compatible change.
Embarrassingly enough, the major source of violations of this is us. Go
used to get this correct in only one of two places. This was only fixed
in 2013 (with 4874bc9b). That's why lots of test certificates are
updated in this change.
Fixes#16166.
Change-Id: Ib9a4551349354c66e730d44eb8cee4ec402ea8ab
Reviewed-on: https://go-review.googlesource.com/27312
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds Config.Renegotiation which controls whether a TLS
client will accept renegotiation requests from a server. This is used,
for example, by some web servers that wish to “add” a client certificate
to an HTTPS connection.
This is disabled by default because it significantly complicates the
state machine.
Originally, handshakeMutex was taken before locking either Conn.in or
Conn.out. However, if renegotiation is permitted then a handshake may
be triggered during a Read() call. If Conn.in were unlocked before
taking handshakeMutex then a concurrent Read() call could see an
intermediate state and trigger an error. Thus handshakeMutex is now
locked after Conn.in and the handshake functions assume that Conn.in is
locked for the duration of the handshake.
Additionally, handshakeMutex used to protect Conn.out also. With the
possibility of renegotiation that's no longer viable and so
writeRecordLocked has been split off.
Fixes#5742.
Change-Id: I935914db1f185d507ff39bba8274c148d756a1c8
Reviewed-on: https://go-review.googlesource.com/22475
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
