Change-Id: Ie36a19ed6d6922e68f98e43745a417a24f8a7828
GitHub-Last-Rev: 6fb32e3d1d4f35704d466b53796e8ddeaf936d72
GitHub-Pull-Request: golang/go#71060
Reviewed-on: https://go-review.googlesource.com/c/go/+/639215
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Roland Shoemaker <roland@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Adds support for server-side ECH.
We make a couple of implementation decisions that are not completely
in-line with the spec. In particular, we don't enforce that the SNI
matches the ECHConfig public_name, and we implement a hybrid
shared/backend mode (rather than shared or split mode, as described in
Section 7). Both of these match the behavior of BoringSSL.
The hybrid server mode will either act as a shared mode server, where-in
the server accepts "outer" client hellos and unwraps them before
processing the "inner" hello, or accepts bare "inner" hellos initially.
This lets the server operate either transparently as a shared mode
server, or a backend server, in Section 7 terminology. This seems like
the best implementation choice for a TLS library.
Fixes#68500
Change-Id: Ife69db7c1886610742e95e76b0ca92587e6d7ed4
Reviewed-on: https://go-review.googlesource.com/c/go/+/623576
Reviewed-by: Filippo Valsorda <filippo@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Daniel McCarney <daniel@binaryparadox.net>
Auto-Submit: Roland Shoemaker <roland@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
This enables JA3 and JA4 TLS fingerprinting to be implemented from
the GetCertificate callback, similar to what BoringSSL provides with
its SSL_CTX_set_dos_protection_cb hook.
fixes#32936
Change-Id: Idb54ebcb43075582fcef0ac6438727f494543424
Reviewed-on: https://go-review.googlesource.com/c/go/+/471396
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Roland Shoemaker <roland@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
This CL adds a (very opinionated) client-side ECH implementation.
In particular, if a user configures a ECHConfigList, by setting the
Config.EncryptedClientHelloConfigList, but we determine that none of
the configs are appropriate, we will not fallback to plaintext SNI, and
will instead return an error. It is then up to the user to decide if
they wish to fallback to plaintext themselves (by removing the config
list).
Additionally if Config.EncryptedClientHelloConfigList is provided, we
will not offer TLS support lower than 1.3, since negotiating any other
version, while offering ECH, is a hard error anyway. Similarly, if a
user wishes to fallback to plaintext SNI by using 1.2, they may do so
by removing the config list.
With regard to PSK GREASE, we match the boringssl behavior, which does
not include PSK identities/binders in the outer hello when doing ECH.
If the server rejects ECH, we will return a ECHRejectionError error,
which, if provided by the server, will contain a ECHConfigList in the
RetryConfigList field containing configs that should be used if the user
wishes to retry. It is up to the user to replace their existing
Config.EncryptedClientHelloConfigList with the retry config list.
Fixes#63369
Cq-Include-Trybots: luci.golang.try:gotip-linux-amd64-longtest
Change-Id: I9bc373c044064221a647a388ac61624efd6bbdbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/578575
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Auto-Submit: Roland Shoemaker <roland@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
This sets us up for ECH, which need compressible extensions to be
contiguous. Put them at the end to make things easier for everyone.
Change-Id: I2a51f76d5fcd1b6d82325f5a4a8cde6d75f1be0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/585437
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Auto-Submit: Roland Shoemaker <roland@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
All OpenSSL tests now test operation with EMS. To test a handshake
*without* EMS we need to pass -Options=-ExtendedMasterSecret which is
only available in OpenSSL 3.1, which breaks a number of other tests.
Updates #43922
Change-Id: Ib9ac79a1d03fab6bfba5fe9cd66689cff661cda7
Reviewed-on: https://go-review.googlesource.com/c/go/+/497376
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Auto-Submit: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
Add a QUICConn type for use by QUIC implementations.
A QUICConn provides unencrypted handshake bytes and connection
secrets to the QUIC layer, and receives handshake bytes.
For #44886
Change-Id: I859dda4cc6d466a1df2fb863a69d3a2a069110d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/493655
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Damien Neil <dneil@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Marten Seemann <martenseemann@gmail.com>
Message marshalling makes use of BytesOrPanic a lot, under the
assumption that it will never panic. This assumption was incorrect, and
specifically crafted handshakes could trigger panics. Rather than just
surgically replacing the usages of BytesOrPanic in paths that could
panic, replace all usages of it with proper error returns in case there
are other ways of triggering panics which we didn't find.
In one specific case, the tree routed by expandLabel, we replace the
usage of BytesOrPanic, but retain a panic. This function already
explicitly panicked elsewhere, and returning an error from it becomes
rather painful because it requires changing a large number of APIs.
The marshalling is unlikely to ever panic, as the inputs are all either
fixed length, or already limited to the sizes required. If it were to
panic, it'd likely only be during development. A close inspection shows
no paths for a user to cause a panic currently.
This patches ends up being rather large, since it requires routing
errors back through functions which previously had no error returns.
Where possible I've tried to use helpers that reduce the verbosity
of frequently repeated stanzas, and to make the diffs as minimal as
possible.
Thanks to Marten Seemann for reporting this issue.
Fixes#58001
Fixes CVE-2022-41724
Change-Id: Ieb55867ef0a3e1e867b33f09421932510cb58851
Reviewed-on: 1679436
Reviewed-by: Julie Qiu <julieqiu@google.com>
TryBot-Result: Security TryBots <security-trybots@go-security-trybots.iam.gserviceaccount.com>
Run-TryBot: Roland Shoemaker <bracewell@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/468125
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Michael Pratt <mpratt@google.com>
Does what it says on the tin.
Fixes#51088
Change-Id: I12c0fa6bba1c1ce96c1ad31ba387c77a93f801c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/384894
Reviewed-by: Roland Shoemaker <roland@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Follow the recommandation from RFC 8422, section 5.1.2 of sending back the
ec_points_format extension when requested by the client. This is to fix
some clients declining the handshake if omitted.
Fixes#31943
Change-Id: I7b04dbac6f9af75cda094073defe081e1e9a295d
Reviewed-on: https://go-review.googlesource.com/c/go/+/176418
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Olivier Poitrey <rs@rhapsodyk.net>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This also updates the vendored-in versions of several packages: 'go
mod vendor' selects a consistent version of each module, but we had
previously vendored an ad-hoc selection of packages.
Notably, x/crypto/hkdf was previously vendored in at a much newer
commit than the rest of x/crypto. Bringing the rest of x/crypto up to
that commit introduced an import of golang.org/x/sys/cpu, which broke
the js/wasm build, requiring an upgrade of x/sys to pick up CL 165749.
Updates #30228
Updates #30241
Updates #25822
Change-Id: I5b3dbc232b7e6a048a158cbd8d36137af1efb711
Reviewed-on: https://go-review.googlesource.com/c/go/+/164623
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Packages in vendor/ directories have a "vendor/" path prefix in GOPATH
mode, but intentionally do not in module mode. Since the import path
is embedded in the compiled output, changing that path invalidates
cache entries and causes cmd/go to try to rebuild (and reinstall) the
vendored libraries, which will fail if the directory containing those
libraries is read-only.
If I understood correctly, this is the approach Russ suggested as an
alternative to https://golang.org/cl/136138.
Fixes#27285Fixes#26988
Change-Id: I8a2507fa892b84cde0a803aaa79e460723da572b
Reviewed-on: https://go-review.googlesource.com/c/147443
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Note that the SignatureSchemes passed to GetClientCertificate in TLS 1.2
are now filtered by the requested certificate type. This feels like an
improvement anyway, and the full list can be surfaced as well when
support for signature_algorithms_cert is added, which actually matches
the semantics of the CertificateRequest signature_algorithms in TLS 1.2.
Also, note a subtle behavior change in server side resumption: if a
certificate is requested but not required, and the resumed session did
not include one, it used not to invoke VerifyPeerCertificate. However,
if the resumed session did include a certificate, it would. (If a
certificate was required but not in the session, the session is rejected
in checkForResumption.) This inconsistency could be unexpected, even
dangerous, so now VerifyPeerCertificate is always invoked. Still not
consistent with the client behavior, which does not ever invoke
VerifyPeerCertificate on resumption, but it felt too surprising to
entirely change either.
Updates #9671
Change-Id: Ib2b0dbc30e659208dca3ac07d6c687a407d7aaaf
Reviewed-on: https://go-review.googlesource.com/c/147599
Reviewed-by: Adam Langley <agl@golang.org>
Added some assertions to testHandshake, but avoided checking the error
of one of the Close() because the one that would lose the race would
write the closeNotify to a connection closed on the other side which is
broken on js/wasm (#28650). Moved that Close() after the chan sync to
ensure it happens second.
Accepting a ticket with client certificates when NoClientCert is
configured is probably not a problem, and we could hide them to avoid
confusing the application, but the current behavior is to skip the
ticket, and I'd rather keep behavior changes to a minimum.
Updates #9671
Change-Id: I93b56e44ddfe3d48c2bef52c83285ba2f46f297a
Reviewed-on: https://go-review.googlesource.com/c/147445
Reviewed-by: Adam Langley <agl@golang.org>
Also check original certificate validity when resuming TLS 1.0–1.2. Will
refuse to resume a session if the certificate is expired or if the
original connection had InsecureSkipVerify and the resumed one doesn't.
Support only PSK+DHE to protect forward secrecy even with lack of a
strong session ticket rotation story.
Tested with NSS because s_server does not provide any way of getting the
same session ticket key across invocations. Will self-test like TLS
1.0–1.2 once server side is implemented.
Incorporates CL 128477 by @santoshankr.
Fixes#24919
Updates #9671
Change-Id: Id3eaa5b6c77544a1357668bf9ff255f3420ecc34
Reviewed-on: https://go-review.googlesource.com/c/147420
Reviewed-by: Adam Langley <agl@golang.org>
Implement a basic TLS 1.3 server handshake, only enabled if explicitly
requested with MaxVersion.
This CL intentionally leaves for future CLs:
- PSK modes and resumption
- client authentication
- compatibility mode ChangeCipherSpecs
- early data skipping
- post-handshake messages
- downgrade protection
- KeyLogWriter support
- TLS_FALLBACK_SCSV processing
It also leaves a few areas up for a wider refactor (maybe in Go 1.13):
- the certificate selection logic can be significantly improved,
including supporting and surfacing signature_algorithms_cert, but
this isn't new in TLS 1.3 (see comment in processClientHello)
- handshake_server_tls13.go can be dried up and broken into more
meaningful, smaller functions, but it felt premature to do before
PSK and client auth support
- the monstrous ClientHello equality check in doHelloRetryRequest can
get both cleaner and more complete with collaboration from the
parsing layer, which can come at the same time as extension
duplicates detection
Updates #9671
Change-Id: Id9db2b6ecc2eea21bf9b59b6d1d9c84a7435151c
Reviewed-on: https://go-review.googlesource.com/c/147017
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Note that there is significant code duplication due to extensions with
the same format appearing in different messages in TLS 1.3. This will be
cleaned up in a future refactor once CL 145317 is merged.
Enforcing the presence/absence of each extension in each message is left
to the upper layer, based on both protocol version and extensions
advertised in CH and CR. Duplicated extensions and unknown extensions in
SH, EE, HRR, and CT will be tightened up in a future CL.
The TLS 1.2 CertificateStatus message was restricted to accepting only
type OCSP as any other type (none of which are specified so far) would
have to be negotiated.
Updates #9671
Change-Id: I7c42394c5cc0af01faa84b9b9f25fdc6e7cfbb9e
Reviewed-on: https://go-review.googlesource.com/c/145477
Reviewed-by: Adam Langley <agl@golang.org>
As a first round, rewrite those handshake message types which can be
reused in TLS 1.3 with golang.org/x/crypto/cryptobyte. All other types
changed significantly in TLS 1.3 and will require separate
implementations. They will be ported to cryptobyte in a later CL.
The only semantic changes should be enforcing the random length on the
marshaling side, enforcing a couple more "must not be empty" on the
unmarshaling side, and checking the rest of the SNI list even if we only
take the first.
Change-Id: Idd2ced60c558fafcf02ee489195b6f3b4735fe22
Reviewed-on: https://go-review.googlesource.com/c/144115
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The equal methods were only there for testing, and I remember regularly
getting them wrong while developing tls-tris. Replace them with simple
reflect.DeepEqual calls.
The only special thing that equal() would do is ignore the difference
between a nil and a zero-length slice. Fixed the Generate methods so
that they create the same value that unmarshal will decode. The
difference is not important: it wasn't tested, all checks are
"len(slice) > 0", and all cases in which presence matters are
accompanied by a boolean.
Change-Id: Iaabf56ea17c2406b5107c808c32f6c85b611aaa8
Reviewed-on: https://go-review.googlesource.com/c/144114
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Use the format "RFC XXXX, Section X.X" (or "Appendix Y.X") as it fits
more properly in prose than a link, is more future-proof, and as there
are multiple ways to render an RFC. Capital "S" to follow the quoting
standard of RFCs themselves.
Applied the new goimports grouping to all files in those packages, too.
Change-Id: I01267bb3a3b02664f8f822e97b129075bb14d404
Reviewed-on: https://go-review.googlesource.com/c/141918
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Each URL was manually verified to ensure it did not serve up incorrect
content.
Change-Id: I4dc846227af95a73ee9a3074d0c379ff0fa955df
Reviewed-on: https://go-review.googlesource.com/115798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Consolidate the signature and hash fields (SignatureAndHashAlgorithm in
TLS 1.2) into a single uint16 (SignatureScheme in TLS 1.3 draft 21).
This makes it easier to add RSASSA-PSS for TLS 1.2 in the future.
Fields were named like "signatureAlgorithm" rather than
"signatureScheme" since that name is also used throughout the 1.3 draft.
The only new public symbol is ECDSAWithSHA1, other than that this is an
internal change with no new functionality.
Change-Id: Iba63d262ab1af895420583ac9e302d9705a7e0f0
Reviewed-on: https://go-review.googlesource.com/62210
Reviewed-by: Adam Langley <agl@golang.org>
SNI values may not include a trailing dot according to
https://tools.ietf.org/html/rfc6066#section-3. Although crypto/tls
handled this correctly as a client, it didn't reject this as a server.
This change makes sending an SNI value with a trailing dot a fatal
error.
Updates #18114.
Change-Id: Ib7897ab40e98d4a7a4646ff8469a55233621f631
Reviewed-on: https://go-review.googlesource.com/33904
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The SignedCertificateTimestampList[1] specifies that both the list and
each element must not be empty. Checking that the list is not empty was
handled in [2] and this change checks that the SCTs themselves are not
zero-length.
[1] https://tools.ietf.org/html/rfc6962#section-3.3
[2] https://golang.org/cl/33265
Change-Id: Iabaae7a15f6d111eb079e5086e0bd2005fae9e48
Reviewed-on: https://go-review.googlesource.com/33355
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When the CT extension is enabled but no SCTs are present, the existing
code calls "continue" which causes resizing the data byte slice to be
skipped. In fact, such extensions should be rejected.
Fixes#17958
Change-Id: Iad12da10d1ea72d04ae2e1012c28bb2636f06bcd
Reviewed-on: https://go-review.googlesource.com/33265
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds Config.Renegotiation which controls whether a TLS
client will accept renegotiation requests from a server. This is used,
for example, by some web servers that wish to “add” a client certificate
to an HTTPS connection.
This is disabled by default because it significantly complicates the
state machine.
Originally, handshakeMutex was taken before locking either Conn.in or
Conn.out. However, if renegotiation is permitted then a handshake may
be triggered during a Read() call. If Conn.in were unlocked before
taking handshakeMutex then a concurrent Read() call could see an
intermediate state and trigger an error. Thus handshakeMutex is now
locked after Conn.in and the handshake functions assume that Conn.in is
locked for the duration of the handshake.
Additionally, handshakeMutex used to protect Conn.out also. With the
possibility of renegotiation that's no longer viable and so
writeRecordLocked has been split off.
Fixes#5742.
Change-Id: I935914db1f185d507ff39bba8274c148d756a1c8
Reviewed-on: https://go-review.googlesource.com/22475
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
cmd and runtime were handled separately, and I'm intentionally skipped
syscall. This is the rest of the standard library.
CL generated mechanically with github.com/mdempsky/unconvert.
Change-Id: I9e0eff886974dedc37adb93f602064b83e469122
Reviewed-on: https://go-review.googlesource.com/22104
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://tools.ietf.org/html/rfc7301#section-3.1 specifies that a
ProtocolName may not be empty. This change enforces this for ServerHello
messages—it's already enforced for ClientHello messages.
Change-Id: Ic5a5be6bebf07fba90a3cabd10b07ab7b4337f53
Reviewed-on: https://go-review.googlesource.com/12003
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The previous code had a brain fart: it took one of the length prefixes
as an element count, not a length. This didn't actually affect anything
because the loop stops as soon as it finds a hostname element, and the
hostname element is always the first and only element. (No other element
types have ever been defined.)
This change fixes the parsing in case SNI is ever changed in the future.
Fixes#10793.
Change-Id: Iafdf3381942bc22b1f33595315c53dc6cc2e9f0f
Reviewed-on: https://go-review.googlesource.com/11059
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
There are two methods by which TLS clients signal the renegotiation
extension: either a special cipher suite value or a TLS extension.
It appears that I left debugging code in when I landed support for the
extension because there's a "+ 1" in the switch statement that shouldn't
be there.
The effect of this is very small, but it will break Firefox if
security.ssl.require_safe_negotiation is enabled in about:config.
(Although almost nobody does this.)
This change fixes the original bug and adds a test. Sadly the test is a
little complex because there's no OpenSSL s_client option that mirrors
that behaviour of require_safe_negotiation.
Change-Id: Ia6925c7d9bbc0713e7104228a57d2d61d537c07a
Reviewed-on: https://go-review.googlesource.com/1900
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
