Note that the SignatureSchemes passed to GetClientCertificate in TLS 1.2
are now filtered by the requested certificate type. This feels like an
improvement anyway, and the full list can be surfaced as well when
support for signature_algorithms_cert is added, which actually matches
the semantics of the CertificateRequest signature_algorithms in TLS 1.2.
Also, note a subtle behavior change in server side resumption: if a
certificate is requested but not required, and the resumed session did
not include one, it used not to invoke VerifyPeerCertificate. However,
if the resumed session did include a certificate, it would. (If a
certificate was required but not in the session, the session is rejected
in checkForResumption.) This inconsistency could be unexpected, even
dangerous, so now VerifyPeerCertificate is always invoked. Still not
consistent with the client behavior, which does not ever invoke
VerifyPeerCertificate on resumption, but it felt too surprising to
entirely change either.
Updates #9671
Change-Id: Ib2b0dbc30e659208dca3ac07d6c687a407d7aaaf
Reviewed-on: https://go-review.googlesource.com/c/147599
Reviewed-by: Adam Langley <agl@golang.org>
Added some assertions to testHandshake, but avoided checking the error
of one of the Close() because the one that would lose the race would
write the closeNotify to a connection closed on the other side which is
broken on js/wasm (#28650). Moved that Close() after the chan sync to
ensure it happens second.
Accepting a ticket with client certificates when NoClientCert is
configured is probably not a problem, and we could hide them to avoid
confusing the application, but the current behavior is to skip the
ticket, and I'd rather keep behavior changes to a minimum.
Updates #9671
Change-Id: I93b56e44ddfe3d48c2bef52c83285ba2f46f297a
Reviewed-on: https://go-review.googlesource.com/c/147445
Reviewed-by: Adam Langley <agl@golang.org>
Looks like the introduction of CCS records in the client second flight
gave time to s_server to send NewSessionTicket messages in between the
client application data and close_notify. There seems to be no way of
turning NewSessionTicket messages off, neither by not sending a
psk_key_exchange_modes extension, nor by command line flag.
Interleaving the client write like that tickled an issue akin to #18701:
on Windows, the client reaches Close() before the last record is drained
from the send buffer, the kernel notices and resets the connection,
cutting short the last flow. There is no good way of synchronizing this,
so we sleep for a RTT before calling close, like in CL 75210. Sigh.
Updates #9671
Change-Id: I44dc1cca17b373695b5a18c2741f218af2990bd1
Reviewed-on: https://go-review.googlesource.com/c/147419
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Since TLS 1.3 delivers handshake messages (including KeyUpdate) after
the handshake, the want argument to readRecord had became almost
pointless: it only meant something when set to recordTypeChangeCipherSpec.
Replaced it with a bool to reflect that, and added two shorthands to
avoid anonymous bools in calls.
Took the occasion to simplify and formalize the invariants of readRecord.
The maxConsecutiveEmptyRecords loop became useless when readRecord
started retrying on any non-advancing record in CL 145297.
Replaced panics with errors, because failure is better than undefined
behavior, but contained failure is better than a DoS vulnerability. For
example, I suspect the panic at the top of readRecord was reachable from
handleRenegotiation, which calls readHandshake with handshakeComplete
false. Thankfully it was not a panic in 1.11, and it's allowed now.
Removed Client-TLSv13-RenegotiationRejected because OpenSSL isn't
actually willing to ask for renegotiation over TLS 1.3, the expected
error was due to NewSessionTicket messages, which didn't break the rest
of the tests because they stop too soon.
Updates #9671
Change-Id: I297a81bde5c8020a962a92891b70d6d70b90f5e3
Reviewed-on: https://go-review.googlesource.com/c/147418
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Implement a basic TLS 1.3 server handshake, only enabled if explicitly
requested with MaxVersion.
This CL intentionally leaves for future CLs:
- PSK modes and resumption
- client authentication
- compatibility mode ChangeCipherSpecs
- early data skipping
- post-handshake messages
- downgrade protection
- KeyLogWriter support
- TLS_FALLBACK_SCSV processing
It also leaves a few areas up for a wider refactor (maybe in Go 1.13):
- the certificate selection logic can be significantly improved,
including supporting and surfacing signature_algorithms_cert, but
this isn't new in TLS 1.3 (see comment in processClientHello)
- handshake_server_tls13.go can be dried up and broken into more
meaningful, smaller functions, but it felt premature to do before
PSK and client auth support
- the monstrous ClientHello equality check in doHelloRetryRequest can
get both cleaner and more complete with collaboration from the
parsing layer, which can come at the same time as extension
duplicates detection
Updates #9671
Change-Id: Id9db2b6ecc2eea21bf9b59b6d1d9c84a7435151c
Reviewed-on: https://go-review.googlesource.com/c/147017
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
crypto/x509 already supports PSS signatures (with rsaEncryption OID),
and crypto/tls support was added in CL 79736. Advertise support for the
algorithms and accept them as a peer.
Note that this is about PSS signatures from regular RSA public keys.
RSA-PSS only public keys (with RSASSA-PSS OID) are supported in neither
crypto/tls nor crypto/x509. See RFC 8446, Section 4.2.3.
testdata/Server-TLSv12-ClientAuthRequested* got modified because the
CertificateRequest carries the supported signature algorithms.
The net/smtp tests changed because 512 bits keys are too small for PSS.
Based on Peter Wu's CL 79738, who did all the actual work in CL 79736.
Updates #9671
Change-Id: I4a31e9c6e152ff4c50a5c8a274edd610d5fff231
Reviewed-on: https://go-review.googlesource.com/c/146258
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The unexported field is hidden from reflect based marshalers, which
would break otherwise. Also, make it return an error, as there are
multiple reasons it might fail.
Fixes#27125
Change-Id: I92adade2fe456103d2d5c0315629ca0256953764
Reviewed-on: https://go-review.googlesource.com/130535
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I tested all fingerprints and confirmed that Chrome and Firefox are
working as intended.
Android fingerprints were grossly unpopular, which could a result of
incorrect merge, but either way we'll remove them for now.
I was confused about how to start an HTTP server if the server
cert/key are in memory, not on disk. I thought it would be good to
show an example of how to use these two functions to accomplish that.
example-cert.pem and example-key.pem were generated using
crypto/tls/generate_cert.go.
Change-Id: I850e1282fb1c38aff8bd9aeb51988d21fe307584
Reviewed-on: https://go-review.googlesource.com/72252
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is the equivalent change to 1c105980 but for SHA-512.
SHA-512 certificates are already supported by default since b53bb2ca,
but some servers will refuse connections if the algorithm is not
advertised in the overloaded signatureAndHash extension (see 09b238f1).
This required adding support for SHA-512 signatures on CertificateVerify
and ServerKeyExchange messages, because of said overloading.
Some testdata/Client-TLSv1{0,1} files changed because they send a 1.2
ClientHello even if the server picks a lower version.
Closes#22422
Change-Id: I16282d03a3040260d203711ec21e6b20a0e1e105
Reviewed-on: https://go-review.googlesource.com/74950
Run-TryBot: Filippo Valsorda <hi@filippo.io>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The root cause of races is that global variables supportedSignatureAlgorithms and
cipherSuites are used both to form handshake and to check whether or not
peer responded with supported algorithm.
In this patch I create separate variables for this purpose.
Updated tests for kicks.
Finally, go fmt.
This change enables the ChaCha20-Poly1305 cipher suites by default. This
changes the default ClientHello and thus requires updating all the
tests.
Change-Id: I6683a2647caaff4a11f9e932babb6f07912cad94
Reviewed-on: https://go-review.googlesource.com/30958
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds support for the ChaCha20-Poly1305 AEAD to crypto/tls,
as specified in https://tools.ietf.org/html/rfc7905.
Fixes#15499.
Change-Id: Iaa689be90e03f208c40b574eca399e56f3c7ecf1
Reviewed-on: https://go-review.googlesource.com/30957
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since this changes the offered curves in the ClientHello, all the test
data needs to be updated too.
Change-Id: I227934711104349c0f0eab11d854e5a2adcbc363
Reviewed-on: https://go-review.googlesource.com/30825
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
X25519 (RFC 7748) is now commonly used for key agreement in TLS
connections, as specified in
https://tools.ietf.org/html/draft-ietf-tls-curve25519-01.
This change adds support for that in crypto/tls, but does not enabled it
by default so that there's less test noise. A future change will enable
it by default and will update all the test data at the same time.
Change-Id: I91802ecd776d73aae5c65bcb653d12e23c413ed4
Reviewed-on: https://go-review.googlesource.com/30824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We will need OpenSSL 1.1.0 in order to test some of the features
expected for Go 1.8. However, 1.1.0 also disables (by default) some
things that we still want to test, such as RC4, 3DES and SSLv3. Thus
developers wanting to update the crypto/tls test data will need to build
OpenSSL from source.
This change updates the test data with transcripts generated by 1.1.0
(in order to reduce future diffs) and also causes a banner to be printed
if 1.1.0 is not used when updating.
(The test for an ALPN mismatch is removed because OpenSSL now terminates
the connection with a fatal alert if no known ALPN protocols are
offered. There's no point testing against this because it's an OpenSSL
behaviour.)
Change-Id: I957516975e0b8c7def84184f65c81d0b68f1c551
Reviewed-on: https://go-review.googlesource.com/30821
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since there's no aspect of key logging that OpenSSL can check for us,
the tests for it might as well just connect to another goroutine as this
is lower-maintainance.
Change-Id: I746d1dbad1b4bbfc8ef6ccf136ee4824dbda021e
Reviewed-on: https://go-review.googlesource.com/30089
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joonas Kuorilehto <joneskoo@derbian.fi>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add support for writing TLS client random and master secret
in NSS key log format.
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format
Normally this is enabled by a developer debugging TLS based
applications, especially HTTP/2, by setting the KeyLogWriter
to an open file. The keys negotiated in handshake are then
logged and can be used to decrypt TLS sessions e.g. in Wireshark.
Applications may choose to add support similar to NSS where this
is enabled by environment variable, but no such mechanism is
built in to Go. Instead each application must explicitly enable.
Fixes#13057.
Change-Id: If6edd2d58999903e8390b1674ba4257ecc747ae1
Reviewed-on: https://go-review.googlesource.com/27434
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These were new with TLS 1.2 and, reportedly, some servers require it.
Since it's easy, this change adds suport for three flavours of
AES-128-CBC with SHA-256 MACs.
Other testdata/ files have to be updated because this changes the list
of cipher suites offered by default by the client.
Fixes#15487.
Change-Id: I1b14330c31eeda20185409a37072343552c3464f
Reviewed-on: https://go-review.googlesource.com/27315
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The RFC is clear that the Parameters in an AlgorithmIdentifer for an RSA
public key must be NULL. BoringSSL enforces this so we have strong
evidence that this is a widely compatible change.
Embarrassingly enough, the major source of violations of this is us. Go
used to get this correct in only one of two places. This was only fixed
in 2013 (with 4874bc9b). That's why lots of test certificates are
updated in this change.
Fixes#16166.
Change-Id: Ib9a4551349354c66e730d44eb8cee4ec402ea8ab
Reviewed-on: https://go-review.googlesource.com/27312
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds Config.Renegotiation which controls whether a TLS
client will accept renegotiation requests from a server. This is used,
for example, by some web servers that wish to “add” a client certificate
to an HTTPS connection.
This is disabled by default because it significantly complicates the
state machine.
Originally, handshakeMutex was taken before locking either Conn.in or
Conn.out. However, if renegotiation is permitted then a handshake may
be triggered during a Read() call. If Conn.in were unlocked before
taking handshakeMutex then a concurrent Read() call could see an
intermediate state and trigger an error. Thus handshakeMutex is now
locked after Conn.in and the handshake functions assume that Conn.in is
locked for the duration of the handshake.
Additionally, handshakeMutex used to protect Conn.out also. With the
possibility of renegotiation that's no longer viable and so
writeRecordLocked has been split off.
Fixes#5742.
Change-Id: I935914db1f185d507ff39bba8274c148d756a1c8
Reviewed-on: https://go-review.googlesource.com/22475
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This change alters the certificate used in many tests so that it's no
longer self-signed. This allows some tests to exercise the standard
certificate verification paths in the future.
Change-Id: I9c3fcd6847eed8269ff3b86d9b6966406bf0642d
Reviewed-on: https://go-review.googlesource.com/13244
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This is the second in a two-part change. See https://golang.org/cl/9415
for details of the overall change.
This change updates the supported signature algorithms to include
SHA-384 and updates all the testdata/ files accordingly. Even some of
the testdata/ files named “TLS1.0” and “TLS1.1” have been updated
because they have TLS 1.2 ClientHello's even though the server picks a
lower version.
Fixes#9757.
Change-Id: Ia76de2b548d3b39cd4aa3f71132b0da7c917debd
Reviewed-on: https://go-review.googlesource.com/9472
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Prior to TLS 1.2, the handshake had a pleasing property that one could
incrementally hash it and, from that, get the needed hashes for both
the CertificateVerify and Finished messages.
TLS 1.2 introduced negotiation for the signature and hash and it became
possible for the handshake hash to be, say, SHA-384, but for the
CertificateVerify to sign the handshake with SHA-1. The problem is that
one doesn't know in advance which hashes will be needed and thus the
handshake needs to be buffered.
Go ignored this, always kept a single handshake hash, and any signatures
over the handshake had to use that hash.
However, there are a set of servers that inspect the client's offered
signature hash functions and will abort the handshake if one of the
server's certificates is signed with a hash function outside of that
set. https://robertsspaceindustries.com/ is an example of such a server.
Clearly not a lot of thought happened when that server code was written,
but its out there and we have to deal with it.
This change decouples the handshake hash from the CertificateVerify
hash. This lays the groundwork for advertising support for SHA-384 but
doesn't actually make that change in the interests of reviewability.
Updating the advertised hash functions will cause changes in many of the
testdata/ files and some errors might get lost in the noise. This change
only needs to update four testdata/ files: one because a SHA-384-based
handshake is now being signed with SHA-256 and the others because the
TLS 1.2 CertificateRequest message now includes SHA-1.
This change also has the effect of adding support for
client-certificates in SSLv3 servers. However, SSLv3 is now disabled by
default so this should be moot.
It would be possible to avoid much of this change and just support
SHA-384 for the ServerKeyExchange as the SKX only signs over the nonces
and SKX params (a design mistake in TLS). However, that would leave Go
in the odd situation where it advertised support for SHA-384, but would
only use the handshake hash when signing client certificates. I fear
that'll just cause problems in the future.
Much of this code was written by davidben@ for the purposes of testing
BoringSSL.
Partly addresses #9757
Change-Id: I5137a472b6076812af387a5a69fc62c7373cd485
Reviewed-on: https://go-review.googlesource.com/9415
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This change adds a new method to tls.Config, SetSessionTicketKeys, that
changes the key used to encrypt session tickets while the server is
running. Additional keys may be provided that will be used to maintain
continuity while rotating keys. If a ticket encrypted with an old key is
provided by the client, the server will resume the session and provide
the client with a ticket encrypted using the new key.
Fixes#9994
Change-Id: Idbc16b10ff39616109a51ed39a6fa208faad5b4e
Reviewed-on: https://go-review.googlesource.com/9072
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
Reviewed-by: Adam Langley <agl@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
- Multiple GetCertificate tests shared the same name and were
overwriting each other, each test now has a unique name.
- expectAlert was not implemented in the data updater, the single
test that used it has been replaced with a ClientHello failure
test.
Fixes#10470
Change-Id: I500738f6302ffa863d7ee45d85fa8773155e0614
Reviewed-on: https://go-review.googlesource.com/8959
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Commit f1d669aee994b28e1afcfe974680565932d25b70 added support for
AES_256_GCM_SHA384 cipher suites as specified in RFC5289. However, it
did not take the arbitrary hash function into account in the TLS client
handshake when using client certificates.
The hashForClientCertificate method always returned SHA256 as its
hashing function, even if it actually used a different one to calculate
its digest. Setting up the connection would eventually fail with the
error "tls: failed to sign handshake with client certificate:
crypto/rsa: input must be hashed message".
Included is an additional test for this specific situation that uses the
SHA384 hash.
Fixes#9808
Change-Id: Iccbf4ab225633471ef897907c208ad31f92855a3
Reviewed-on: https://go-review.googlesource.com/7040
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Generalizes PRF calculation for TLS 1.2 to support arbitrary hashes (SHA-384 instead of SHA-256).
Testdata were all updated to correspond with the new cipher suites in the handshake.
Change-Id: I3d9fc48c19d1043899e38255a53c80dc952ee08f
Reviewed-on: https://go-review.googlesource.com/3265
Reviewed-by: Adam Langley <agl@golang.org>
ECDSA is unsafe to use if an entropy source produces predictable
output for the ephemeral nonces. E.g., [Nguyen]. A simple
countermeasure is to hash the secret key, the message, and
entropy together to seed a CSPRNG, from which the ephemeral key
is derived.
Fixes#9452
--
This is a minimalist (in terms of patch size) solution, though
not the most parsimonious in its use of primitives:
- csprng_key = ChopMD-256(SHA2-512(priv.D||entropy||hash))
- reader = AES-256-CTR(k=csprng_key)
This, however, provides at most 128-bit collision-resistance,
so that Adv will have a term related to the number of messages
signed that is significantly worse than plain ECDSA. This does
not seem to be of any practical importance.
ChopMD-256(SHA2-512(x)) is used, rather than SHA2-256(x), for
two sets of reasons:
*Practical:* SHA2-512 has a larger state and 16 more rounds; it
is likely non-generically stronger than SHA2-256. And, AFAIK,
cryptanalysis backs this up. (E.g., [Biryukov] gives a
distinguisher on 47-round SHA2-256 with cost < 2^85.) This is
well below a reasonable security-strength target.
*Theoretical:* [Coron] and [Chang] show that Chop-MD(F(x)) is
indifferentiable from a random oracle for slightly beyond the
birthday barrier. It seems likely that this makes a generic
security proof that this construction remains UF-CMA is
possible in the indifferentiability framework.
--
Many thanks to Payman Mohassel for reviewing this construction;
any mistakes are mine, however. And, as he notes, reusing the
private key in this way means that the generic-group (non-RO)
proof of ECDSA's security given in [Brown] no longer directly
applies.
--
[Brown]: http://www.cacr.math.uwaterloo.ca/techreports/2000/corr2000-54.ps
"Brown. The exact security of ECDSA. 2000"
[Coron]: https://www.cs.nyu.edu/~puniya/papers/merkle.pdf
"Coron et al. Merkle-Damgard revisited. 2005"
[Chang]: 50860436.pdf
"Chang and Nandi. Improved indifferentiability security analysis
of chopMD hash function. 2008"
[Biryukov]: 70730269.pdf
"Biryukov et al. Second-order differential collisions for reduced
SHA-256. 2011"
[Nguyen]: ftp://ftp.di.ens.fr/pub/users/pnguyen/PubECDSA.ps
"Nguyen and Shparlinski. The insecurity of the elliptic curve
digital signature algorithm with partially known nonces. 2003"
New tests:
TestNonceSafety: Check that signatures are safe even with a
broken entropy source.
TestINDCCA: Check that signatures remain non-deterministic
with a functional entropy source.
Updated "golden" KATs in crypto/tls/testdata that use ECDSA suites.
Change-Id: I55337a2fbec2e42a36ce719bd2184793682d678a
Reviewed-on: https://go-review.googlesource.com/3340
Reviewed-by: Adam Langley <agl@golang.org>
A new attack on CBC padding in SSLv3 was released yesterday[1]. Go only
supports SSLv3 as a server, not as a client. An easy fix is to change
the default minimum version to TLS 1.0 but that seems a little much
this late in the 1.4 process as it may break some things.
Thus this patch adds server support for TLS_FALLBACK_SCSV[2] -- a
mechanism for solving the fallback problem overall. Chrome has
implemented this since February and Google has urged others to do so in
light of yesterday's news.
With this change, clients can indicate that they are doing a fallback
connection and Go servers will be able to correctly reject them.
[1] http://googleonlinesecurity.blogspot.com/2014/10/this-poodle-bites-exploiting-ssl-30.html
[2] https://tools.ietf.org/html/draft-ietf-tls-downgrade-scsv-00
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/157090043
